
| Again, as with most Scotty parts, you will be hard pressed to find an original awning from a Scotty, but there are a few out there, and well worth the time and effort put into it to find one. And just like most rv parts, there are several types available for your Scotty, some better than others , some more expensive than others , it all just depends on what you are looking for. The original awning on the Scotty's slide into an awning rail mounted on the edge strip on top of the camper, a piece of welting is sewn into the material and it slides down the rail, with a touch of dish soap or other lube, it will slide more easily. |

The above picture shows how the awning is attached to a Scotty Hilander, the Gaucho is the same, the only thing different in the picture and the awning I have on my 77 Hilander is there are 3 poles, instead of two across the front. When I first got my Hilander, I was lucky and it had the original awning with it, the problem was how in the heck did it work, finally after an hour of trying my 12 year old daughter figured it out, so I will try to explain how it works. First make sure your door is closed, I made that mistake first and I now have a small rip in my original awning. You have 3 poles with loops on them. Those 3 poles fit together and slide into the looped part of the awning in the front, oh did I mention sliding the welted edge into the rail at the top of the edging, if it goes hard, put some lube on it. I use a little dish washing liquid. Once the awning is on the camper, take the 3 poles and slide them through the loop at the front of the awning, line up the loops on the rails with the slots provided in the awning. Once your pole is in, you have 3 poles left, these poles are adjustable in length. Put the end with the bolt on it through the eye of the loop sticking out of the awning and have someone hold it for you. Do the same thing with the other corner, at that time you can tie down the corners. I use two tie downs on each corner, then I put in the center one and I tie it down with one. I then adjust the tension on the canopy to where I want it. That is my attempt to tell you how to put it up. Now, as you know, if you don't have the original or no awning you can have them made , and I've supplied some links at the bottom of this posting. If you don't have the awning rail here is a link to purchase one . It mounts on the edging across the top of the camper I think most members use canvas replacement for purchasing awnings, and there are a few who venture into making their own. |
| If you have any information you would like to share with the group please email me at dturner26531@yahoo.com |

| DIANE SOLDOW WINDOW AWNING CLICK HERE FOR MORE PICTURES |



| SHE ALSO LISTS ON EBAY UNDER VINTAGE CAMPER AWNINGS |