| SERRO SCOTTY CAMPERS ENTHUSIASTS EDGE STRIPS/ALUMINMUN TRIM |
ONE OF THE MAJOR PROBLEMS IN REBUILDING OR REBUILDING A SCOTTY CAMPER IS YOU HAVE TO REMOVE THE EDGING ON THE CORNERS.
THIS MUST BE DONE TO GET AT THE WOOD BEHIND THE SKINS, WHICH IS USUALLY ROTTED AWAY FROM WATER DAMAGE. TO REMOVE
THIS EDGING, TAKE A STIFF PUDDY KNIFE, AND PUT UNDER THE EDGING , BY THE SCREW NAILS THAT HOLD IT DOWN AND WORK THE NAIL
LOOSE SO THAT YOU CAN GET A PRY BAR UNDER IT AND PULL IT OUT. YOU NEED TO BE CAREFUL REMOVING THE STRIP, AS TO NOT BEND
IT, OR SCARE IT UP. ONCE YOU HAVE REMOVED THE NAILS FROM THE EDGING, AND YOU HAVE REMOVED THE EDGING, MAKE SURE YOU PUT
THE EDGING IN A SAFE PLACE , THEY BEND AND TWIST VERY EASILY.
THIS MUST BE DONE TO GET AT THE WOOD BEHIND THE SKINS, WHICH IS USUALLY ROTTED AWAY FROM WATER DAMAGE. TO REMOVE
THIS EDGING, TAKE A STIFF PUDDY KNIFE, AND PUT UNDER THE EDGING , BY THE SCREW NAILS THAT HOLD IT DOWN AND WORK THE NAIL
LOOSE SO THAT YOU CAN GET A PRY BAR UNDER IT AND PULL IT OUT. YOU NEED TO BE CAREFUL REMOVING THE STRIP, AS TO NOT BEND
IT, OR SCARE IT UP. ONCE YOU HAVE REMOVED THE NAILS FROM THE EDGING, AND YOU HAVE REMOVED THE EDGING, MAKE SURE YOU PUT
THE EDGING IN A SAFE PLACE , THEY BEND AND TWIST VERY EASILY.
 | |  |
| If you have any information you would like to share with the group please email me at dturner26531@yahoo.com |
