SERRO SCOTTY CAMPER ENTHUSIASTS

HUBCAPS
VINTAGE TRAILER
SUPPLY
VINTAGE TRAILER
SUPPLY


TIRE SIZE CALCULATOR
The only place that I have found that has the rims that are close
to the original rims at a decent price is
Low Cost Trailer Supply.
I have ordered from these people and they have fast shipping and
as I said decent prices. The rims I ordered are
A-WH155-50E .
I also ordered their hup caps 1308
They also carry trailer tires and again not to bad in price, though I have not ordered Tires
from them, I buy them local, so they can be put on for me.  
Any information on tires, rims or
hubcaps. Share with the group
email me at
dturner26531@yahoo.com
SENT BY JEANNE KEITH THANKS JEANNE !!!

rom: Serro_Scotty_Camper_Enthusiasts@yahoogroups.com [mailto:
Serro_Scotty_Camper_Enthusiasts@yahoogroups.com ] On Behalf Of Steve & Jeanne Keith
Sent: Friday, May 19, 2006 9:41 AM
To: Serro_Scotty_Camper_Enthusiasts@yahoogroups.com
Subject: [Serro_Scotty_Camper_Enthusiasts] New Member---tire
information



Information on the website under TIRES WHEELS shows the bolt pattern
for the rims and information on the description on the different kinds of
tires.
What you want to make sure is that you get trailer tires (ST) and the older
Scottys 13' and 15' models came with 640x15 General Travel trailer
tires----which is now translated to ST205/75D15---that is what I have from
Stratham Tire and they are NANCO brand tires. Have you read the section in
the web site on ''changing a tire''????? You have to jack the back up to
allow the axle to drop in order to get them off..If a heavy load, you have
to jack up from both corners on the frame from the back, if a light load you
just have to jack up the side you need. Hope this helps. Good Luck.

Jeannie Keith
Pembroke , NH
WHY BUY TRAILER TIRES ?

REPLATING YOUR HUBCAPS
FROM TOM BURK


Hi Everybody, if anyone is interested in
re-chrome of their Scotty Hubcaps, I
have used the following shop with great,
success and satisifaction, on many of my
Jukebox Restorations, and now the
Scotty Hubcaps !!! "Victor" is the owner,
and has very competive prices, and good
turn around time. Price starts at $40.00
& up, depending on existing condition,
for EACH hubcap. Caps get dents
hammered out, then a chemical bath,
then polished, coppered, nickeled,
chromed, and a final polishing. Add $8.00
- $10.00 shipping EACH way, per pair. I
am very pleased. Here is the address:
Courtesy Metal Polishing 735 N. Addison
Road Villa Park, Illionis 60181
630-832-1862 If you care, you can tell
Victor, Tom Burk in Cleveland, Ohio,
referred you to him. Check around for
priceing. I think you'll be pleased !!! Any
questions, call me at 216-570-4266 ANY
hour 24/7 Happy Trails !!!! Tom Burk
from Ken Scott
Dexter information

Here is a link to Dexter Axle wheel bolt torque guidelines and some other
useful tire info. I dont know if you have this.

click here
Bearing information from NSSO site